Description: Soudaseal MS Clear is a crystal clear, neutral, elastic, single component sealant/adhesive based on MS-Polymers®. Applications: Soudaseal MS Clear is mainly recommended for transparent bonding in metal and construction industries. It provides an excellent elastic bonding in many construction and building applications. Soudaseal MS Clear is most suitable for invisible bonding of glass, interior spider glazing, air-conditioning duct sealing, connection joints, building and construction joints. Properties Base MS Polymer® Consistency Stable paste Curing System Moisture Cure Skin formation (20°C / 65% R.V.) Ca 10 min. Curing Rate (20°C / 65% R.V.) 3 mm/24h Hardness (DIN 53505) 38 ± 5 Shore A Specific Gravity (DIN 53479) 1.04 g/ml Maximum Deformation ± 20% Temperature Resistance (fully cured) -40°C to +90°C Elasticity Modulus 100% (DIN 53504) 0.80 N / mm2 Tear Strength (DIN 53504) 2.40 N / mm2 Elongation at break (DIN 53504) 300% Characteristics: • 100% transparent, extra clear • Outstanding bond strength, mostly without primer, on nearly all surfaces, even moist • High performance mechanical properties • Very easy to tool and finish • Good extrudeability even at low temperatures • Ecological advantages – free of isocyanates, solvents, halogens and acids • Minimal health and safety considerations • Can be painted with water based paints and a number of other systems • Permanently elastic after full cure